Preservation Plates Microbial Preservation Plates Microbial strains such as E.coli and yeast can be dry-preserved on a paper chip coated with a preservation agent.Samples can be sealed individually with an accessory protection seal to prevent contamination and inactivation.This enables compact and efficient preservation at room temperature – it is no longer necessary to use deep freeze or dry ice for transportation. Note : When handling the specific pathogens, please act in accordance with the applicable laws and regulations in your county. Microbial viability with time in Preservation Plate How to Use Preservation Method 1.Let the paper chip absorb a liquid sample. A: For a liquid sampleB: For a sample from agar Protective agent is spread on paper chips and it may appear as dot pattern but it does not affect the qualities. 2.Dry the sample. *Reduced pressure drying is recommended. Recommended dry time[96 well] 60 minutes or more[1/3 well] 90 minutes or more Insufficient drying may result in faulty performance. 3.Seal the plate with the protection seal and store it in room temperature. Make sure that the film is tightly applied. Loose sealing may cause contamination. Recovery Method 1.Peel off the protection seal and place the paper chip into a container. Push the paper chips by tweezers etc. Pick up the paper chip from tweezer hole. Cut out the necessary size of paper chip. 2.Put the solution into the container and stir.In the case of agar, rub the paper chip onto agar. Microbial Preservation Plate Lineup size: W 115 mm x D 80 mm Dramatic savings per chip！ Made from Polypropylene: it is easy to cut！ Convenient well layout to match your 96 well plate！ Lower cost per well. Easy to cut Matches your PCR plate’s wells. Microbial Preservation Plate 96 well Material: Polypropylene (plate) Cat. No.ItemUnit176-531SMicrobial Preservation Plate for Bacteria, 96 well5 plates / bag176-551SMicrobial Preservation Plate for Fungi, 96 well5 plates / bag The shape to take out easily with tweezers. size: W 76 mm x D 26 mm Microbial Preservation Plate 3 well Material: polystyrene (plate) Cat. No.ItemUnit176-331SMicrobial Preservation Plate for Bacteria, 3 well5 plates / unit176-351SMicrobial Preservation Plate for Fungi, 3 well5 plates / unit size: W 76 mm x D 26 mm Microbial Preservation Plate 1 well Material: polystyrene (plate) Cat. No.ItemUnit176-231SMicrobial Preservation Plate for Bacteria, 1 well5 plates / unit176-251SMicrobial Preservation Plate for Fungi, 1 well5 plates / unit Microbial Preservation Plate Q&A Preservation Plate has been developed from the study reslut of MEXT’s Intellectual Cluster Formation Project .The verification experiments have been implemented under advice of Dr. A. Yokota and Dr. M. Kurahashi of Institute of Cellular and Molecular Biosciences, the university of Tokyo.This project is supported by METI’s New Cooperation Measure Subsidy. Product Inquiry ※We also accept inquiries for mass production development of custom shapes, such as OEM and ODM, for plastic products. Contact